EN RU
Mixed Flow Pump
  • Mixed Flow Pump
  • Mixed Flow Pump

Mixed Flow Pump

★ Introduction

The SOM series pump is single-stage and single suction overhung centrifugal pump that applied in the neutral or caustic liquid with solid which is high flow and low head.

SOM mixed-flow pumps conform to GB/T 13008 standard Performance.

—Flow                         Q : up to ~8000 m³/h

—Head                        H : up to  ~25m

—Pressure                   P  : up to  ~0.6MPa

—Temperature            T  :  -20~+155℃

★ Applications

—The imposed circulation in chemical industry process

—Sea water culture and desalt .    —The gas project in the city.

—Water treatment system .           —Paper-making industry.

★ Features

High efficiency low energy loss.

The pump energy consumption. is evenly within the performance limit, it could startup under closed valve condition, so the motor could not overload.

The large wetted section; not plugged easily.

The firmly structure and long running  life.

★ The Horizontal Structure (SOM)

The pump is pull out structure, the casing has not to be dismantled from connecting pipeline during maintaining The shaft is produced precisely. and the bearing with oil, lubricating, the protective shaft  is installed in packing housing, the oil level could be controlled by constant level oiler bearing housing.

★ Vertical Structure (SOMV)

The pump structure is compact, and the covering area is small, it is conveniently for installing the motor is connected with casing by vertical housing it is not necessary to dismantle the pipeline using the grease to lubricate.

The support foot is cast on casing. which could stand the load from pipeline, and transmitting it to the base plate, so the rotor could not bend for pump loading therefore the bearing is guaranteed for  long life.

In order to vent for suction pipe conveniently the complete vent device is equipped on pump.

The pump rotation direction: it is CW viewing from the driving end.

The power: adopting motor or gas engine.

In order to drain conveniently for suction pipeline, the completely drain equipment could be installed on setting.

★ Seal Type

The packing or single and double end mechanical seal.

Mixed flow pump2188.png


Boye Dinghe Road Urban Sector,Baoding,Hebei 071300, China
+86 312 8306 113
hbtdby@aliyun.com
+86 312 8327 015
Follow Us

Copyright © Hebei Tongda Pump Co., Ltd. All Rights Reserved Sitemap