Home  >>  News

The Reasons And Solutions Of Slurry Pumps Body Shaking

Released on Nov. 26, 2018

When the Slurry Pumps is in use, sometimes the pump body will shake. Many users will turn off the pump to check if they have not figured out the cause. Sometimes a small small detail will not be done and the mud pump will be caused. The shaking of the body will have a bad effect on the equipment. So why do we have pump body shake during use?

First, the reason for the mud pump pump body shaking

1. When the Single Stage Slurry Pump is propelled into the water flow, the accompanying eddy current, cavitation can not avoid large vibrations.

2. There are debris in the pump inlet pipe, the impeller, and the pump. The pump and the foundation are not fastened, and the resonance is enhanced.

3. The quality of the mud pump is not good, the rotor is unbalanced, the pump and the motor shaft are not concentric, and the rotor and the stator part collide or rub.

4. The equipment is used for a long time, the pump wears and deteriorates, the impeller is loosely loosened, the bearing is damaged or the bearing clearance is large.

Second, the mud pump pump body shaking solution

1. Adding a spring isolator When attaching a spring isolator to the mud pump, pay attention to the choice of style and deflection.

2. Install rubber isolator. The choice of rubber vibration isolator, the material is generally neoprene, natural rubber, generally use compression rubber damper, for the light weight of the pump, the choice of shear rubber damper.

3. Install a sturdy base. In order to meet the stricter vibration standard of the sand pump, it is undoubtedly the best choice to use the spring isolator when installing the sturdy base.

Slurry Pumps

Boye Dinghe Road Urban Sector,Baoding,Hebei 071300, China
+86 312 8306 113
+86 312 8327 015
Follow Us

Copyright © Hebei Tongda Pump Co., Ltd. All Rights Reserved Sitemap