EN RU
Home  >>  News

What Is A Mixed Flow Pump?

Released on Jul. 24, 2018

When the prime mover drives the impeller to rotate, the action on the liquid has both centrifugal force and axial thrust. It is a combination of the centrifugal pump and the axial flow pump, and the liquid flows obliquely out of the impeller. It is therefore a pump between the centrifugal pump and the Vertical Axial Flow Pump. The specific speed of the Mixed Flow Pump is higher than that of the centrifugal pump, which is lower than the axial flow pump, generally between 300 and 500. Its head is higher than the axial pump, but the flow is smaller than the axial pump and larger than the centrifugal pump. Used to transport clean and contaminated media, chemically neutral or aggressive media; forced circulation in chemical processes, marine aquaculture, urban gas engineering, water treatment systems. The mixed flow pump is a "pull out" type structure pump. When inspecting and disassembling the impeller and the shaft seal, it is not necessary to disassemble the pipe connected to the pump body. It is equipped with a precision-machined pump shaft with a thin oil-lubricated bearing and a protective bushing in the stuffing box cover. The oil level of the bearing housing can be controlled by the constant oil cup. The HW pump is a horizontal, single stage, single suction, volute type mixed flow pump. Suitable for transporting clean water or other liquids that are physically and chemically similar to clean water. The temperature of the liquid being transported is not higher than 50 degrees Celsius. Widely used in farmland irrigation and drainage, industrial and urban water supply and drainage and other occasions.

Mixed Flow Pump

Boye Dinghe Road Urban Sector,Baoding,Hebei 071300, China
+86 312 8306 113
hbtdby@aliyun.com
+86 312 8327 015
Follow Us

Copyright © Hebei Tongda Pump Co., Ltd. All Rights Reserved Sitemap