Home  >>  News

Operation Details Of Slurry Pump

Released on Dec. 15, 2018

When the Slurry Pump works, the pump needs to be put on land, the suction pipe needs to be put in water, and the pump needs to be started. Mud pump and submerged slurry pump due to structural constraints, when working the motor needs to be placed on the water surface, the pump into the water, so it must be fixed, otherwise, the motor falls into the water will lead to motor scrap. Because the length of the long axis is generally fixed, the installation and use of the pump is more troublesome, and the application occasion is limited. When slurry pump is dealing with slurry with more impurity particles, such as removing slurry, a filter can be placed at the intake, which can reduce impurity particles entering the pump body, reduce the probability of sticking the pump and prolong the service life of the slurry pump.

Single Stage Single Suction Slurry Pump use time should not be too long, if there is a spare pump, it is best to take the form of rotation work. Slurry pump in the working process, should be placed on the ground to maintain the stability of the pump body. If it is a slurry pump or a submerged slurry pump that needs underwater work, the pump must be placed into the water because of its structure. At this time, the motor should be placed on the water surface and fixed to maintain the stability of the slurry pump. Some of the slurry pumps adopt mechanical seals. The use of such slurry pumps must ensure the supply of water for shaft seals, and strictly prohibit the operation without water, so as to avoid the burning of mechanical seals caused by dry grinding. Generally speaking, mechanical seal slurry pump should be connected with shaft seal water before use, and should maintain water supply for at least 3 minutes after shutdown.

Slurry Pump

Boye Dinghe Road Urban Sector,Baoding,Hebei 071300, China
+86 312 8306 113
+86 312 8327 015
Follow Us

Copyright © Hebei Tongda Pump Co., Ltd. All Rights Reserved Sitemap