Home  >>  News

Troubleshooting Of Deep Well Submersible Pumps

Released on Aug. 06, 2018

What are the reasons for the failure of the deep Submersible Deep Well Pump? The Submersible Water Pump Supplier will answer you

1: The power supply has no power or the switch is not closed;

2: The power is not turned on;

3: The control box is loosely connected due to transportation vibration;

4: The AC contactor coil has burned out.

5: Waiting for an incoming call or closing the power switch;

6: Check the control box with an electric meter or an electric pen. If there is no power, turn on the power;

7: Check the connection points of the control box and fasten them with a screwdriver;

8: Check the contactor coil with the meter “Ω” file, repair or replace it.

9: One of the power sources is open;

10: CJ main contact burned out;

Submersible Deep Well Pump

Boye Dinghe Road Urban Sector,Baoding,Hebei 071300, China
+86 312 8306 113
+86 312 8327 015
Follow Us

Copyright © Hebei Tongda Pump Co., Ltd. All Rights Reserved Sitemap