This is actually the top selected item of other customers purchasing items related to chugger pump. For further options, look at our catalog of Chugger Pump or use the search box.
Buy Chugger Pump Online
CHUGGER PUMP XCPSS-CI-1 X-DRY with Run Dry Protection, SS 115 Volt Center Home Brewing System Beer Pump, 55” Cord w/Plug, 3/4" x 1/2” MPT Connections, ETL-Certified, US FDA Food Compliant Materials
- New FDA Approved Run Dry Carbon Bearing Material (X-Dry Run Dry Protection). Inlet 3/4" MPT and Outlet 1/2" MPT Allows Configuration for Any Application; 1/20 HP (.04 HP) .029 KW; Motor Only: 1.7 Amps; Motor and Pump: 1.9 Amps; Motor Amp Rating: Full-Load Amps (FLA); This is NOT a Self-Priming Pump. Head Needs To Be Flooded w/ Liquid Prior To Being Turned On.
- ETL-Certified; USFDA Food Compliant Materials; UL Recognized; Sturdy 115-Volt (50/60HZ) Booster Pump With 55" Electric Cord with plug; Non-Submersible; Comparable to March 815-SS-Beer Pump
- Transfers Flow of Hot and Cold Liquids Between Brewing Vessels or Kettles; Cools Wort Via a Counter-Flow Chiller; Recirculates Ice Water for Quicker Chilling; Circulator Pump with 316 Stainless Steel Front and Rear Housing; Made by Brewers for Brewers
- Light Enough to Be Portable; High-Quality Stainless Steel Pump Head Eliminates Stripped Threads; Head is Interchangeable with Existing March Pump Motors; Magnetic Drive with Base, Teflon Thrust Washer, Clear Silicone O-Ring, and Ryton/Teflon Impeller
- Max Flow Rate of 7 GPM 26.5 LPM; 18.6-Feet 4.1M of Max Head to Handle Back-Pressure; Device is Capable of Handling Liquids of Different Temperatures Up to 250 Degrees F
CHUGGER PUMP XCPSS-IN-1 X-DRY with Run Dry Protection, SS 115 Volt Inline Home Brewing System Beer Pump, 55" Cord w/Plug, 1/2" MPT Connections, ETL-Certified, US Food Compliant Materials
- New Run Dry Carbon Bearing Material (X-Dry Run Dry Protection). Inlet 1/2" MPT and Outlet 1/2" MPT Allows Configuration for Any Application; 1/20 HP (.04 HP) .029 KW; Motor Only: 1.7 Amps; Motor and Pump: 1.9 Amps; Motor Amp Rating: Full-Load Amps (FLA); This is NOT a Self-Priming Pump. Head Needs To Be Flooded w/ Liquid Prior To Being Turned On.
- ETL-Certified; Food Compliant Materials; UL Recognized; Sturdy 115-Volt (50/60HZ) Booster Pump With 55" Electric Cord with plug; Non-Submersible; Comparable to March 815-SS-Beer Pump
- Transfers Flow of Hot and Cold Liquids Between Brewing Vessels or Kettles; Cools Wort Via a Counter-Flow Chiller; Recirculates Ice Water for Quicker Chilling; Circulator Pump with 316 Stainless Steel Front and Rear Housing; Made by Brewers for Brewers
- Light Enough to Be Portable; High-Quality Stainless Steel Pump Head Eliminates Stripped Threads; Head is Interchangeable with Existing March Pump Motors; Magnetic Drive with Base, Teflon Thrust Washer, Clear Silicone O-Ring, and Ryton/Teflon Impeller
- Max Flow Rate of 7 GPM 26.5 LPM; 18.6-Feet 4.1M of Max Head to Handle Back-Pressure; Device is Capable of Handling Liquids of Different Temperatures Up to 250 Degrees F
FERRODAY Magnetic Drive Pump Wort Pump Food Grade High Temperature Stainless Head Magnetic Pump 15RM with 1/2"NPT thread Home Brew
- 【Safely Transfer Liquid】 : Transferring liquids is an important part of any brew operation, and the most easy and safe way to transferring liquids is to attach this magnetic pump, the propeller will magnetically circulates liquids for you. Please note: Moving giant vessel with hot wort yourself is not safe.
- 【Quiet and Efficient】 : The pump’s main shaft is separated from the impeller, which has damping and anti-Vibration function, aim to reducing the influence of motor vibration on the pump. Realized a high efficiency smooth running, and excellent quiet circulation.
- 【Solid Magnetic Pump】 : Fully-sealed magnetic pump, motor with connecting the magnetic shaft and magnetic propeller, all magnetically coupled for enhanced operation. This is a High output volume and quiet operation industrial/ home brew equipment. Great heat resistant up to 120℃/ 248℉.
- 【Easy to Use】 : Prime by running liquid through the pump prior to turning it on; The liquid travels from the bottom of the valve into the pump, and once the pump is powered on, the propeller will start to circulate the liquids; Perfect for transferring and circulation.
- 【Life Time Service】We are committed to offer you high quality product as well as superior service! Please feel free to tell us if any problems, we would try our best to satisfy you. Lifetime technical support.
Blichmann Engineering Riptide Pump
- RipTide is the very first pump designed specifically for homebrewing!
GILE HOUSE BREW SUPPLY Stainless Steel Head Magnetic Drive Wort & Beer Pump - 120V Food Grade Water Circulation Pump With In-line Switch
- Stainless Steel Pump Head For Durability
- In-Line Switch For Ease Of Operation
- Rated For Transfer Of Liquid Up To 240°F
- Magnetic Drive Ensures No Lubricated Bearings Contact The Liquid And Prevents Contamination
- Extremely Quiet Operation
YalePro PUMP, onesize, Inline
- 3/4" MPT inlet and outlet, easily attach barbed fitting and plastic tubing
- Maximum liquid temperature of 250 deg Farenheit
- Stainless steel head with Teflon washer and impeller
- 115 volts working voltage with 4. 5 feet long wire
- Maximum flow rate of 7 GPM and maximum head of 18. 6 feet
CHUGGER PUMP TRI-TCPSSMAX-CI Tri Clover Brewery Home Brew Beer Pump, 1 1/2″ Molded Tri-Clamp Fittings, SS Sanitary Connections, 115/230 Volt TEFC Motor, FDA Compliant Materials, UL Recognized, 17 GPM.
- FDA Compliant Materials Components, UL Listed
- 1/2″ Molded Tri-Clamp Fittings (Not Welded)
- 115 & 230 Volt AC TEFC Motor, 1/8 Horsepower
- Tri-Clover fittings are the perfect way to bring sanitary connections, found in commercial brewing applications
- 55″ Cord (No Plug, Should be wired by an electrician)
CHUGGER PUMP Max Series TCPSSMAX-CI Stainless Steel 115/230 Volt Brew Pump for Small Breweries, 55” Cord NO Plug, SS Center Inlet 1” FPT x Outlet 1/2” MPT, USFDA Food Compliant Materials; UL Recogniz
- UL Recognized; USFDA Food Compliant Materials; Switchable 115-Volt or 230-Volt AC Motor (50/60HZ); Booster Pump with 55” Electric Cord (NO PLUG); Totally Enclosed Fan-Cooled (TEFC) Motor
- Transfers Flow of Hot and Cold Liquids Between Brewing Vessels or Kettles; Cools Wort Via a Counter-Flow Chiller; Recirculates Ice Water for Quicker Chilling; Small Breweries Circulator Pump with 316 Stainless Steel Front and Rear Housings
- Light Enough to Be Portable; High-Quality Construction Includes Magnetic Drive with Base, Ceramic Washers, Ryton/Teflon/Glass Impeller, and Silicone O-Ring
- More Volume with Max Flow Rate of 17 GPM @12 PSI and Minimum ID Inlet 3/4”; 27-Feet of Max Head to Handle Back-Pressure; Handles Liquids Up to 250 Degrees F
- Inlet 1" FPT and Outlet 1/2" MPT Allows Configuration for Any Application; 1/8 HP (.125 HP); Motor Only: 1.4 Amps; Motor and Pump: 2.0 Amps; CHUGGER PUMP Max Series Contains Sealed Bearings; No Oil Necessary; This is NOT a Self-Priming Pump, DO NOT RUN DRY
SEAFLO Stainless Steel Liquid Pump with Power Plug for Home Brewing Systems and High Temperature Systems - 115 VAC, 7.6 GPM (Inline)
- This pump is perfect for all home brewing, beer brewing, or high temperature systems. Capable of handling up to 250 degrees Fahrenheit
- The pump is a non-self-priming magnetic drive unit built specifically to handle hot wort and cold liquids.
- Continuous duty with a lifespan of 15000 hours. DO NOT RUN DRY
- USFDA Food Compliant Materials. 115 VAC Brew Pump with 55” electric cord with plug for wall outlet; Non-Submersible. Comparable to March 815-SS, March 809 Beer pumps, and CHUGGER pumps.
- Inline Design
BACOENG Stainless Steel 115 Volt Inline Home Brewing System Beer Pump, 55” Cord WITH Plug, Inlet 1/2” x Outlet 1/2” MPT
- SPECIFICATIONS: 1/2inch MPT Inlet&Outlet; 110V/60Hz; 5GPM max. flow; 10W rated power; No self-priming; Do not run dry; 4.75ft long 3-prong power cord.
- FDA FOOD COMPLIANT - Stainless steel is used in professional setups because it is a durable, food-grade metal that can withstand caustic chemicals and can be effectively sanitized.
- EASY TO USE: Prime by running liquid through pump prior to turning on; The liquid travels from the bottom of the valve into the pump, and once device is powered on (plugged in to outlet), the propeller circulates liquid for maximum flow; Use to dispense beer, treat water, transfer hot water from your kettle to a mash tun, or recirculate mash wort and sparge and transfer to a brew kettle
- MATERIAL PERFORMANCE: Pump extraction medium temperature changes should be controlled within 100℃, high temperature does not exceed 120℃. Shaft bearing adopt special ceramics material which make it characterize strong resistance for abrasion and corrosion.
- MAGNETIC: Fully sealed pump motor with connecting magnetic shaft and magnetic propeller; Magnetically coupled for enhanced operation
Home Brew Pumps TCPSS-CI Chugger Mini Max 115/230 Volt Brewing Pump, Stainless Steel Center w/TEFC Motor
- Chugger Pump Mini Max Home Brew Beer Pump Center Inlet
- Inlet 3/4″ MPT & Outlet 1/2″ MPT
- Max Flow: 7 GPM (Gallons Per Minute)
- Comes with a 55" cord, no plug.
- Power: 1/8 HP (.125 Horsepower)
HARPOON Home Brewing Pump, MP-15RM Magnetic Beer Water Pump,Stainless Steel 304 Food Grade, High Temperature Resistance with CE Certification, 110V US Plug, 1/2" Thread (Classical)
- Material: Stainless Steel
- Max: Flow16/19L/Min
- Voltage: 110V; Output: 10W
- Thread: 15R 1/2”NPT
- Apply to :Beer Dispensing,Water Treatment,Pollution Controll,Chemical Industry
bayite BYT-7A015 DC 12V Solar Hot Water Heater Circulation Pump with DC Power Supply Adapter Low Noise 3M Head 8LPM 2.1GPM
- Circulation pump is non-self-priming pump. Max Flow Rate: 2.1GPM, Max Discharge Head: 9.8ft
- 1/2" Male thread on the pump. The OD of the brass coupler is 10mm. Comes with a power adapter
- Power source: DC 12V(POWER ADAPTER INCLUDED), Rated current: 0.7A, Brushless Motor, Low noise: 30db at 1 metre, Service life: 30000 hours
- Max circulating water temperature: 100°C/212°F. It's submersible but can't be immersed in hot water exceeding 50°C/122℉
- One year warranty: replacement without return
Magnetic Drive Home Brew Beer Siphon and Water Circulation Pump - Stainless Steel Head with 1/2in Thread
- [Safely Transfer Liquids]: Use the G. Francis Magnetic Drive Home Brew Beer Siphon and Water Circulation Pump to transfer hot and cold liquids instead of trying to move giant brew kettles yourself and running into accidents and injuries; Transferring liquids is a part of any homebrew operation, and this magnetic drive pump is an optimum liquid transport pump with high output volume and quiet operation for industrial and home equipment
- [Easy to Use]: Prime by running liquid through pump prior to turning on; The liquid travels from the bottom of the valve into the pump, and once device is powered on (plugged in to outlet), the propeller circulates liquid for maximum flow; Use to dispense beer, treat water, transfer hot water from your kettle to a mash tun, or recirculate mash wort and sparge and transfer to a brew kettle
- [Built to Last]: Stainless-steel head, magnetic pump, plastic head for strength and longevity; Safe for beverages, resistant to abrasion, corrosion, and heat up to 221 degrees Fahrenheit (105 degrees Celsius); 6.5-inch x 2.6-inch (15.5cm x 6.4cm) pump overall dimensions with 3.25-inch x 2.5-inch (8.3cm x 6.4cm) steel mounting plate (mounting hardware not included)
- [Magnetic]: Fully sealed pump motor with connecting magnetic shaft and magnetic propeller; Magnetically coupled for enhanced operation
- [Specifications]: 4.75-foot (1.4m) long 3-prong 18AWG power cord; 1/2-inch NPT thread; 110V; Not self-priming (do not run dry); 5 gallons per minute (19 L/min) maximum capacity; 11.2-foot (3.4m) maximum head; 10W rated power; 150mA current; 60 Hz frequency; 3,000 r/min speed
Chugger Pumps SSPH-CI Stainless Steel Center Beer Pump Replacement Head, 1/2" Outlet, 3/4" Inlet MPT Connections
- 1/2" Outlet, 3/4" Inlet MPT Connections
- Stainless Steel
- Beer Pump Replacement Head
GILE HOUSE BREW SUPPLY EZ Transfer Pump Connection Kit w/Silicone Hose and Stainless Fittings
- Includes everything you need to hook up your wort pump to your vessel
- Make life easy on brew day with quick disconnect fittings making transfers a breeze
- All fittings and hose clamps are high quality stainless steel.
- Gile House Brew Supply offers lifetime warranty on all fittings (does not include valves, hoses or hose clamps)
- Pump Not Included
Happybuy Beer Brewing Pump Stainless Steel Head with 1/2 Inch Mpt Magnetic Home Brew Pump 110 Volt Inline Home Brewing System Beer Pump
- 【SPECIFICATIONS】-1/2inch MPT Inlet&Outlet; 110V/60Hz; 5GPM max. flow; 10W rated power; With 19 LPM (5 GPM) max flow rate, our beer pump can lift max 3.4 m (10 ft).
- 【SAFE TRANSFER LIQUIDS】- Tested for safety and performance standards, it can transfer hot and cold liquids quickly and safely. Comply with FDA food standards, can be used in prpfessional occasions. Food grade pump can withstand caustic chemicals and can be effectively sanitized.
- 【QUIET AND EFFICIENT】 - The separation of the pump main shaft and the impeller achieves the effect of damping and preventing vibration, and reduces the impact of the motor vibration on the pump. With excellent smooth running and efficient quiet cycle.
- 【EASY OPERATION】- Prime by running liquid through pump prior to turning on; The liquid travels from the bottom of the valve into the pump, and once device is powered on (plugged in to outlet), the propeller circulates liquid for maximum flow; Use to dispense beer, treat water, transfer hot water from your kettle to a mash tun, or recirculate mash wort and sparge and transfer to a brew kettle
- 【USED WIDELY】 -This homebrew beer pump is an optimum liquid transport pump with high output volume and quiet operation for industrial and home equipment.
MRbrew Upgrade Magnetic Beer Pump, Food Grade Stainless Steel Head with 1/2’’ Inch Thread, Quiet Circulation Operation, Excellent High Temperature Resistance System Pump for Brewing
- 【No Leak, Good Sealing】Pump shaft is a closed static seal, Splash proof, Greatly avoiding liquid leakage and Achieving excellent sealing, Easier to prime, Amazing liquid circulation beer pump
- 【Food grade stainless steel】Magnetic pump head with 1/2’’ inch Thread is made of Food grade 304 stainless steel, High resistance to corrosion, Not easy to get rust, Non-toxic, Environmentally friendly, Lifetime-Using brewing pump
- 【Safely Transfer Liquid】High temperature resistance water transfer Pump, Liquid temperature up to 120 degrees Celsius, No need to manually lift a mash tun or boiled kettle to transfer liquid, Avoid human body injury, Increase speed in a safer manner, Save time and effort, Save cost
- 【No Noise, Quiet Operation】Main shaft is separated from the impeller, Has damping and anti-Vibration function, Reducing the influence of motor vibration on the pump, Low power consumption, High efficiency,Run smoothly, Excellent Repeatable magnetic pump
- 【100% LIFELONG IUUSES SOLVING FOR YOU】Each MRbrew liquid transferring beer pump is backed by unbeatable, reliable, trusted product quality and customer service, please feel free to contact us if you are not satisfied, we will unconditionally solve for you.
RipTide Upgrade Kit for March & Chugger Pumps
- Give your Chugger or March pump all the great features of A RipTide pump with this upgrade kit
- Tri-clamp head connection fully disassembles in minutes for easy cleaning.
- Integral linear flow valve for superior flow control
- Stainless steel head rotates 360 degrees to fit in virtually any installation
MRbrew Quick Disconnect 304 Stainless Steel Set 1/2'' FPT Male 1/2'' Female Barb (1/2'' FPT Male,1/2'' Female Barb)
- ♞SAFE AND RELIABLE CONNECTION : Anti-pollution design assures integrity and purity of fluid and gas circuits,smooth transition,No contaminants enter the circuit.There can be 360 degrees of rotation between the coupling body and the insert body while maintaining airtightness.
- ♞NON-DRIP DESIGN : The long guide rod design makes the quick connection between the plug and the socket more consistent, and the structure is more stable.With high temperature resistance Sanitary Silicone seal ring to ensure No leaking.There is interchangeability between the coupling body and the insert body,can be freely connected in multiple pipes
- ♞EXCELLENT MECHANICAL STRENGTH : All are High-strength Food-grade 304 stainless steel, all of which have been heat-treated to increase strength. Whether it is high temperature or low temperature has good wear resistance, corrosion resistance and durability, lifelong use.
- ♞MORE CONVENIENT : Anti-skid design, Installation and disassembly more easily and flexibly, Barbed retracting locks for easy slide-back ,Connecting and Disconnecting just one second; Small Volume and Large Flow, faster cleaning and disinfection.
- ♞WIDE APPLICATION : MRbrew Beer Quick Disconnect be widely used in connection to Plate Wort Chillers,Ball Valve,Wort Pumps, Kettle Stock Pot etc.
Last update 2020-07-02. Price and product availability may change.