This is actually the top rated choice of other clients getting products related to rule 1500 bilge pump. For additional options, have a look at our full list of Rule 1500 Bilge Pump or use the search box.
Buy Rule 1500 Bilge Pump Online
Rule 35A Rule-A-Matic Bilge Pump Float Switch, Mercury Free,White
- A genuine Rule product, don't settle for anything less
- Year after year, the Rule-A-Matic has been the switch of choice for boaters the world over
- Switch is removable from the base for easy cleaning
- Completely sealed metal capsules enhance flawless operation
- A mercury free snap switch tested to over one million cycles
- Marine grade "blocked" wire
Rule 40A Rule-A-Matic Plus Bilge Pump Float Switch, 12, 24 or 32 Volt, Moisture Tight Seals , White , Small
- A genuine Rule product, don't settle for anything less, 2 year warranty
- Sleek and rugged with a strong, fully integrated impact resistant cover to protect against debris and jamming
- 14 gauge highly abrasive resistant marine grade wire
- Built-in test feature
- Designed for pumps drawing up to 20 amps
- Will turn the pump on when the water level reaches 2" (51mm) and will turn the pump off when water level falls to 3/4" (19mm)
Amarine Made 1500GPH 12v Boat Marine Plumbing Electric Bilge Pumps (A)
- Small size, high efficiency, low current (low cost switching power supply supporting); to achieve a small size perfect combination of high flow
- Unique automatic "discharge" function can bear the long-term continuous operation under nearly congestion condition Impact resistant ABS housing
- Heavy duty motors with stainless steel shafts and tough. thermoplastic bodies submersible bilge pumps are tough enough for any bilge
- Heavy duty motors, offer high capacity output Water cooled long-life motors ; Ignition protection Water/moisture tight seals; Stainless steel shafts; Rustproof and corrosion resistant
- Snap lock strainer base for easy installation and removal; Silent and vibrationless operation
Rule-Mate RM1500A Automated Bilge Pump, No Float Switch Required, 1500 GPH, 12 Volt
- A Genuine Rule Product, don't settle for less, limited 3 year warranty
- Features a solid state water sensing technology that eliminates the need for a separate float switch
- Pump turns on when water level rises and shuts off when water is removed, will not pump oil — straight motor oil that enters the bilge will not turn the pump on
- Snap-off strainer for easy cleaning
- Anti-fouling impeller.
AIRTAK Bilge Pump for Boat DC12V 1500GPH Small Bilge Pump 12 Volt Electric Water Pump Low Noise
- Compact efficient long life motors: Small volumn and portable bilge pump is made of long life motors .It can Improve work efficiency
- Exclusive Moisture Ting Seals: Bilge pump is made from heavy duty marine sealant and corrosion material Protection
- Cleanable Strainer: The pump base is used by high qulity easy clean snap lock strainers. the life-span of the bilge pump could be prolonged.
- Easy to Install: Design common installation location and it can use with the bilge switch
- Wide Application : Bilge pump can be used in aquarium,fishing boats,fountain and other places to easily drain the water
ECO-WORTHY 1100GPH 12V Marine Electric Bilge Pump for Boat Caravan RV Submersible Non-Automatic
- Flow Rate: 1100 GPH; Voltage: 12 VDC
- Flow: 1100 gallons per hour or 5000 L / hour, Head: 13 Ft (4mts), Outlet Dia. 1-1/8" (29mm)
- Typical Uses: Suitable for hydraulic systems fed with cold water—used in line to be fed by gravity or pressure.
- Ideal For Fishing Boats, Cruisers, Runabouts, Yachts, Etc
- Built for the harsh marine environment, are suitable to withstand the most adverse condition. The water-cooled engine ensures a long service life
SEAFLO 12V 1500 GPH Bilge Pump and Automatic Float Switch
- 12V DC 1500 GPH Bilge Pump
- Automatic Float Switch
- Turns pump on at 2" water level (51 mm)
- Turns pump off at 3/4" water level (19 mm)
- Heavy Duty, fully submersible electric pump
Rule 14A 3700 GPH Heavy Duty Bilge Pump, Non-Automatic, 12 Volt , White/Red
- A genuine Rule product, don't settle for less
- Heavy duty construction for both commercial and pleasure boat use
- Known for trouble free operation and reliability
- 1-1/2" (38mm) discharge outlet
- 3 year warranty
Rule 500 GPH 25SA Electronic Sensing Bilge Pump-500
- Completely automatic with manual override; no float switch needed
- Submersible and ignition protected
- High efficiency, low amp motor
- Stainless-steel shaft
- Includes backflow preventer
Rule 02 Marine Bilge Pump, 1500 GPH, Non-Automatic, 12 Volt (Renewed)
- A genuine Rule product, don't settle for anything less
- More pumping capacity and more exclusive design features than any comparable competitive pump at a lower cost
- 1-1/8 inch (28. 6 millimeter) hose barb discharge outlet, 12 Volts DC, limited 3 year
- Silent and vibrationless operation. Stainless steel shaft, completely submersible, rust and corrosion protection
- Compact, efficient, long-life motors, able to run dry for short periods
MAXZONE Automatic Submersible Boat Bilge Water Pump 12v 1100gph Auto with Float Switch (Blue - Automatic)
- Flow Rate (GPH): 1100GPH; Volt: 12V; Current(A): 3.8A; Head(M): 3.0M
- Wire Lead(M): 1m; Outlet Diameter: 29mm/ 0.95 Inch (1-1/8"); Width: Approx. 81mm
- Built-in float switch! (No separate float switch is needed)
- No power use until pump is activated by internal float switch (when water level rises)
- Equipped with built in electronic controlled reed sensor system for easy fully automatic operation
Rule 51S Marine Rule 1500 Automatic Bilge Pump (12-Volt),White/Red
- A genuine Rule pump, 3 year warranty
- Electronic sensing series bilge pumps
- Turns the pump impeller every 2-1/2 minutes for approximately one second
- If water is present, the pump will sense resistance and will continue to run until all water is removed
- A compact way of constantly sensing for water presence
Rule 800 GPH 20DA Standard Bilge Pump-800
- Non-automatic, used with a panel switch or Rule float switch
- Submersible and ignition protected
- Highly efficient, low amp motor
- Stainless-steel shaft
- Includes backflow preventer
Rule 02 Marine Bilge Pump, 1500 GPH, Non-Automatic, 12 Volt,Red/White/Blue
- A genuine Rule product, don't settle for anything less
- More pumping capacity and more exclusive design features than any comparable competitive pump at a lower cost
- 1-1/8 inch (28. 6 millimeter) hose barb discharge outlet, 12 Volts DC, limited 3 year
- Silent and vibrationless operation. Stainless steel shaft, completely submersible, rust and corrosion protection
- Compact, efficient, long-life motors, able to run dry for short periods
DasMarine 1500GPH 12V Electric Marine Submersible Bilge Sump Water Pump for Boat Yacht
- 1.Flow Rate (GPH): 1500GPH; Volt: 12V; Current(A): 8.0A; Head(M): 5.0M;hose barb discharge outlet:1-1/8 inch (29millimeter)
- 2. Fully submersible electric pump.Small size, high efficiency, low current (low cost switching power supply supporting)
- 3.Heavy duty motors with stainless steel shafts and tough. thermoplastic bodies submersible bilge pumps are tough enough for any bilge
- 4.Snap lock strainer base for easy installation and removal; Silent and vibrationless operation
- 5.Silent and vibrationless operation. Stainless steel shaft, completely submersible, rust and corrosion protection, need a separate float switch
Rule Industries RM1100B Mate Bilge Pump 1100 GPH
- Bilge Pump 1100 GPH
- Built from quality materials for durability
- Quick and easy installation
- Refer to manufacturer recommendations and guidelines to ensure a proper fit
Jabsco Rule 02-6 Marine Bilge Pump, 1500 GPH, Non-Automatic, 12 V with 6 Foot Wire Leads
- A genuine Rule product, don't settle for anything less
- More pumping capacity and more exclusive design features than any comparable competitive pump at a lower cost
- 1-1/8 inch (28.6 millimeter) hose barb discharge outlet, 24 Volts DC, limited 3 year warranty
- Silent and vibrationless operation. Stainless steel shaft, completely submersible, rust and corrosion protection
- Compact, efficient, long-life motors, able to run dry for short periods
SeaChoice 19301 Submersible 2000 GPH Bilge Pump
- Rugged white ABS plastic construction
- 304 stainless steel fasteners
- 12V. 600 and 1000 packed in double blisters
- Not recommended for commercial use
- Meets NMMA certification requirements
- Rule 500 Gph Bilge Pump
- Rule 2000 Bilge Pump
- Rule Bilge Pump
- Rule 800 Gph Bilge Pump
- Rule Automatic Bilge Pump
Last update 2020-07-02. Price and product availability may change.