This is the top choice of other clients purchasing products related to septic pump submersible. For additional possibilities, check out our full list of Septic Pump Submersible or use the search box.
Buy Septic Pump Submersible Online
Superior Pump 91570 1/2 HP Thermoplastic Submersible Utility Pump with 10-Foot Cord
- 1/2 HP Utility pump moves up to 3,300 gallons per hour; pump will lift water up to 25' of vertical height
- Tough thermoplastic construction; 10' cord length
- 1-1/2 inch NPT discharge for high capacity pumping; includes 3/4 inch garden hose adapter; Amps:4.9
- Removable suction screen and handles up to 3/8 inch solids
- Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested
1/2 HP Schaefer E-Series Effluent Septic Pump
- Stainless steel or thermoplastic discharge and motor bracket are tough and non-corrosive. Both materials are highly resistant to damage by minerals, metals, and other substances typically found in water.
Zoeller 267-0001 M267 Waste-Mate Sewage Pump, 1/2 Horsepower, 115V
- 1/2 HP submersible sewage pump, 100% factory tested
- Automatic model with integral float switch
- 2" NPT discharge, passes 2" spherical solids
- Performance: 128 GPM at 5' TDH, shut-off: 21.5' TDH
- Cast iron construction, 10' cord
Hallmark Industries MA0414X-7 Deep Well Submersible Pump, 1 hp, 110V, 60 Hz, 33 GPM, 207' Head, Stainless Steel, 4"
- Pump, Deep Well Submersible Pump, 1HP, 110V 60HZ, 33 Gpm, Stainless Steel, for 5" or bigger well, long life
- 2 wire pump with built in control box- DOES NOT require external control box; Industrial grade heavy duty, good for home usage; Built in thermal protection
- American company
Zoeller M53 Mighty-mate Submersible Sump Pump, 1/3 Hp
- 3/10 HP pump for residential sump pits or septic tanks
- 1½" discharge, passes 1/2" spherical solids
- Automatic model with integral float-activated switch
- Cast iron switch case, motor, and pump housing, plastic base
- Performance: 43 GPM at 5' TDH, shut-off: 19.25' TDH. 100% factory tested
Hallmark Industries MA0343X-4 Deep Well Submersible Pump, 1/2 hp, 110V, 60 Hz, 25 GPM, 150' Head, Stainless Steel, 4"
- Pump, Deep Well Submersible Pump, 1/2HP, 110V 60HZ, 25 Gpm, Stainless Steel, for 5" or bigger well, long life
- 2 wire pump with built in control box- DOES NOT require external control box; Industrial grade heavy duty, good for home usage; Built in thermal protection
- American company
- Use 115V power to run the pump. 110V is a nominal voltage - covers from 100 V to 130V.
- This pump has a max head of 150feet, which is to pump into an open tank, not a pressure tank. Please read the Pump Selection Guide provided under the product details.
Wayne RPP50 Cast Iron Sewage Pump with Piggy Back Tether Float Switch
- 1/2 hp; max. Flow rate is 6200 gallons per hour; 3240 gph at 10 ft. Of discharge lift
- Durable, cast iron submersible sewage pump
- 2 in. Npt discharge capable of handling up to 2 in. Solids
- Ideal for basement or below grade installations
- Bottom suction design passes solids up to 2 inches large
WAYNE CDU980E 3/4 HP Submersible Cast Iron and Stainless Steel Sump Pump With Integrated Vertical Float Switch
- Assembled in the US with foreign and domestic parts
- Top suction pump design minimizes air locks and clogging from debris in bottom of sump pit.Assembled in us, with foreign and domestic components
- Stainless steel motor housing and rugged, cast iron pump base
- Vertical float switch, tested to 1 million cycles!4600 GPH at 10 ft. of discharge lift
- 1-1/2 In. NPT Discharge for compliance with building codes
Franklin Electric C1 Septic Water High Head Submersible Effluent Pump, 20 GPM, 1/2 HP, 115V
- 20 GPM
- 115V
- 2 year warranty
Zoeller 98-0001 115-Volt 1/2 Horse Power Model M98 Flow-Mate Automatic Cast Iron Single Phase Submersible Sump/Effluent Pump …
- 1/2 HP pump for residential sump pits or septic tanks
- Automatic model with integral float switch, 1½" discharge, passes 1/2" solids
- Performance: 72 GPM at 5' head, shut-off: 23' TDH
- All cast iron construction with stainless steel guard and handle
- 100% factory tested
Sta-rite 20DOM05121+1 20gpm Septic Pump/Cistern pump
- 1/2 HP
- 115v
- Extra stage for more head pressure
- very durable
Wilo 2708302 WCC17-20.50 115-volt Sewage/Effluent Pump
- Features 2 inches NPT discharge capable of handling up 2 inches solid 3/4 inches solids
- Comes with 115-volt, 1/2 horsepower rating
- Features cast iron housing with oil filled motor; includes 10-feet power cord
- WCC17-20.50
- Cast Iron, Oil-filled motor
- Oil-filled motor
Sta-Rite 20DOM05121 STEP Plus D-Series High Head Submersible Effluent Pump, 20 GPM, 1/2 HP, 115V
- Superior draw-down capability to 4-1/2” (114mm) vs. 13-1/2” (343mm) on a standard NEMA 4
- 25% Reduced AMP-draw 9.5 amps vs. 12.7 amps on a standard NEMA 4”
- Cooler and quieter operation – eliminates expensive “flowinducer sleeves”
- Enclosed and self-lubricated Nylatron shaft-bearing resists wear from abrasives
- Heavy 7/16” (12mm) positive drive 300 Series stainless steel hexagonal shaft
Superior Pump 93501 1/2 HP Cast Iron Sewage Pump with Tethered Float Switch
- 1/2 HP Sewage pump moves up to 4,800 gallons per hour; pump will lift water up to 25' of vertical height
- Rugged cast iron construction; 10' cord length
- Tethered float switch to automatically turn the pump on/off.
- 2 inch NPT discharge, will handle up to 2 inch solids and features a non-clogging vortex impeller
- Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested
Zoeller 57-0001 M57 Basement High Capacity Sump Pump
- 3/10 HP pump for residential sump pits or septic tanks
- 1½" discharge, passes 1/2" solids
- Automatic model with integral float switch
- Performance: 43 GPM at 5' TDH, shut-off: 19.25' TDH
- All cast iron construction with stainless steel guard and handle
- 100% factory tested
Happybuy Well Pump 1/2 HP Submersible Well Pump 150ft Head 25GPM Stainless Steel Deep Well Pump for Industrial and Home Use
- 【ESSENTIAL PARAMETER:】 Submersible Pump voltage: 110V 50HZ; The length of cable：5ft;applicable well diameter: 100mm / 4 inch; power: 0.37KW / 0.5HP; Pump flow: 25GPM; Pump impeller: 4PCS; Pump highest head: 150ft
- 【CONVENIENT OPERATION:】 Deep well pump with 5ft cable, combined motor and pump in one, it deep dive into the water to work. Small footprint well pump, and easy on Installation, use, maintenance, no needs of constructing pump room
- 【APPLICABLE CONDITION:】 The water pump has no special requirement on well and water pipe, that means the pump can used in Steel pipe wells, ash pipe wells or soil wells, and if the pressure permit, steel pipe, hose or plastic pipe can be used as its water pipe
- 【EXCELLENT PERFORMANCE:】 Stainless steel body, a built in check valve（unsealed）, can be mounted vertically, Industrial grade heavy duty, also good for home usage
- 【WIDELY USED:】It is suitable for extraction from the deep wells for groundwater, and can also be used in rivers, reservoirs, canals and other water lifting works.Mainly used in farmland irrigation and mountainous areas for human and animal using water, but also for draining in cities, factories, railways, mines.
Liberty Pumps LE51A LE50-Series Submersible Automatic Sewage Pump, RED
- Pumps up to 160 GPM
- Shut-off head of 25-Foot
- Oil filled, thermally protected motor
- 2-vane semi-open impeller capable of passing a 2-Inch spherical solid
- Quick-disconnect 10-Foot standard power cord allows replacement of cord in seconds without breaking seals to motor
WAYNE CDU800 1/2 HP Submersible Cast Iron and Steel Sump Pump With Integrated Vertical Float Switch
- 1/2 HP submersible sump pump made of durable cast iron
- Assembled in the USA with foreign and domestic parts
- Ceramic mechanical seal for work in demanding environments
- 1-1/2-inch discharges for maximum flow. Abrasion Resistant Glass Reinforced Polycarbonate Impeller for Reliability
- 3-year limited warranty.High performance; max. flow rate is 5100 Gallons Per Hour
ECO-FLO Products RSE50W Cast Iron Sewage Pump with Wide Angle Switch, 1/2 HP, 5,700 GPH
- Heavy duty cast iron and thermoplastic construction for strength and long life
- Extra long 20' power cord length for installation flexibility
- Pumps 2" solids
- Download the User Manual under the Technical Specification section of this page for safety, installation, troubleshooting, and warranty information
- Click on the ECO-FLO Products link at the top of this page to see more pump options from ECO-FLO Products
Last update 2020-07-02. Price and product availability may change.